Tuesday, 14 June 2016

Playing with the Silhouette Portrait cutting machine

**Warning - large update with lots of pictures!**

I've referenced the Silhouette Portrait in several recent posts and its results have attracted a fair amount of interest / attention. So this, rather large update, is all about the cutting machine and what I've managed to make it do so far!

First of all, the new EMU is now ready for exhibition, here it's been for a quick spin around the test track, coupled to the existing three car set...

The windows in this set were all pre-cut and although this made the process much quicker, the windows didn't quite line up in places due to not having the original source image to work from. Therefore the windows had to be cut smaller to allow for this, so cutting was still required - just less of it.

Here it can be seen that there is a slight difference in colour, this is due to a change of printer and after three trial runs, where the print was way too bright, this was the closest match I could get. Let's face it, in real life, the units would have discoloured in service!


Having declared cutting windows to be a reasonable success, I decided to move on and see if I could actually get a near-perfect cutting pattern for my next project - renovating old coaches.

I have a fair number of SR green coaches, some immaculate and some really only fit for the spares box. It seems a shame to let them go to waste so if I could restore them in some way, at least they will get some use.

To start, I dismantled a good brake coach so that I could get a decent colour image scan. With the image saved, I began colouring the window apertures black and then imported the file into the Silhouette software to design the cuts. For the door windows this is a rectangle, for the other windows a rounded rectangle shape was used and the cutting outline was positioned just around the inside of the black window shape.

Back to the source image, even with the best quality scan, the image was never going to be perfect. The doors were all re-drawn, nothing complicated just a couple of straight lines and three small rectangles for the hinges. The large handles were filled rectangles and the small handles are the only surviving bit of the original scan. This was recoloured and cleaned up before pasting into the new image, starting with a green rectangular background and continuing from there, copying and pasting each window set (window, door, window) along the design, still using the original scan to ensure alignment is correct.

Once the sides of the brake van were complete, a standard coach was then created, copying and pasting the same windows from before. No need to take a fresh scan of the coach, I was able to construct it purely by having the coach on my desk under the PC screen as I worked!

A few black & white draft prints were then made to ensure that the transfer will line up correctly with the windows - an easy job to get the alignment right. Then time to print the prototype. Here the sides of the brake coach are untreated and compared with the passenger coach that now has the vinyls fitted.


The fit and finish was good. The only issue was that the black edges of the windows, where I'd coloured them previously, could be seen. As the plotting was now correct, I was able to go back to the image and paint out all the windows, leaving a plain green side.

So with the prototype complete, I raided the scrap box looking for potential candidates, and came across three maroon coaches. I've had these for ages and never run them, mainly because they all look like this:


Rusty roofs, rusty wheels, scratched, dented, etc. Not exactly display material.

Now the good thing is that the maroon coaches are designed in exactly the same way as the green ones - all the windows are in the same place, all that was needed was a reasonable colour match, which I managed after three test prints, and to add stripes, a panel for the brake coach, the Guard sign on the door of the brake coach and modify the handles slightly (different shape on these)

For the best results, the surface has to be smooth - no rust, no loose paint...


 Several coach sides were so bad that the only thing I could do was go back to bare metal, prime and then apply a quick coat of red...


Now, with the image finalised and printed, time to cut...


Matt vinyl this time (because I'd run out of gloss!)

After lining up the graphics by eye, making sure that the windows lined up before pressing home, they were smoothed into position. The only cuts being to the left & right edges, which I cut deliberately long to make the overlays easier to handle. The top & bottom of the overlay is folded over the edges to give a neat finish...


The sides were then sprayed with gloss lacquer - three coats required.

The coach roofs were also stripped to bare metal, straightened, given two coats of grey primer and three coats of lacquer. The underframes just needed the wheels cleaned and a quick blow over with satin black to refresh.

And this is the result... 


Old vs refurb - not perfect but certainly near enough for me!



So this would normally be the end of my update. But there's more!

Now that I've established that the Silhouette cutter can restore my coaches, I wanted to see what it could do with the graphics I made a while ago for the 0-6-2 tanks.

I've been advised that my numbers (69568 & 69569) are wrong and were never produced, so only 69567 is correct. So this project also includes renumbering.
The graphics were imported into the Silhouette software again and measurements of the body were taken to ensure that the vinyls fit properly.

The test loco is probably the worst repaint of a 0-6-2 tank that I've ever seen (and I didn't do it)

A test run, using ordinary paper confirmed that the settings were correct...


Then it was time to cut again...



The last number set was produced using the Gill Sans font. Although this looks quite nice, it looks nothing like the original Dublo version, and I've never found a font that matches.

So it was back to Microsoft Paint with a high quality image of the side of an original 69567, the number was then cropped and enhanced electronically, then re-coloured ready to insert back into the design. I decided to go with 69566 and 69565 - to create these I simply copied and pasted a 6 and a 5 from the number I'd just created and pasted in place of the 7. The result is a reasonable reproduction of the original design...


 We can't leave that body as it is, so it was stripped back to bare metal (the black paintwork was still underneath)


Primed...


Painted satin black...


And then the boiler bands and graphics were applied, before a coat of matt lacquer to seal everything.

At this point, the lacquer is still not quite dry - the final finish is now much better and the edges of the vinyls can hardly be seen.


The next job will be to paint the buffer beam and add the smoke box number, before refurbishing and refitting the handrails. This body will then be exchanged with one of the other black 0-6-2s and eventually all three will be renumbered.

The Silhouette Portrait certainly is a useful bit of kit. The software isn't the easiest to live with, primarly because you can't copy & paste into the software, everything has to be opened as an image file. I think the idea is that you're supposed to use the Silhouette templates that are commercially available but I've proved that it can be made to work for producing graphics to revitalise my rolling stock. My painting talents are limited so this is a low-cost way for me to get my tatty looking coaches back into use.

Finally, here's the machine in action, cutting the EMU sides:


Thursday, 9 June 2016

Another blue & grey EMU

No real need for more EMUs but as the blue EMU can now be run in either six or nine car formation, the blue & grey one looks a bit lonely running as just a solitary three car set.

At the time, the blue & grey set was produced solely as an experiment - ideally the third blue set should have been made as a blue & grey, so I decided to make one final EMU set.

It's a long-winded job. Although using the Silhouette Portrait cutter made life easier. I was able to pre-cut all the windows, cutting them slightly smaller to allow for any minor adjustments, it also made it easier to line up the vinyl before sticking it down in position. The result is that the vinyls on this unit are much straighter, even though the quality of the image is slightly different due to being printed from a new printer (some colour tweaks were needed) and the Portrait software can't do cut & paste from other applications, the images have to be saved and opened separately.


The newly printed and cut graphics are lined up against the coach side prior to assembly to ensure a good fit. A black and white draft print was done on ordinary paper to make sure that the settings were right and that all the doors & windows line up.


The graphics for the cab ends were also cut electronically, much more accurate, easier to apply...


Especially the destination boards, cut using a rounded rectangle template, these look much better than the previous attempts. I have now revisited the rest of the blue EMUs and added the same cab graphics... 


And after three coats of lacquer to the sides, two coats of grey primer on the roofs and two coats of Vauxhall Mustard Yellow on the cab ends, the bodies were ready for assembly.

The wheels & bogies were cleaned and lightly oiled, years of muck scraped off the nylon plastic wheels, which should make it run smoother.

And then the whole thing is put back together...


So that's five, three car EMU sets.

That'll do.

Tuesday, 31 May 2016

Clearing the desk

The last few weeks have been spent trying to make a knackered old Castle look like a Hogwarts Express. This is about as good as it's going to get:


Now to finish the other Castles, which have been cluttering up my desk for ages and feature in the background of many of my other photos.

With Dorchester Castle finished a while ago, I wanted to do a similar restoration job with the remaining bodies. So more transfers were ordered, this time from Modelmaster Decals.

Both Castles were stripped and painted at the same time. The linings were then applied, followed by the brass nameplates, numbers and handrails.

Both have had major mechanical overhauls. With a show coming up at Harman's Cross, it seemed fitting to make a Corfe Castle:



And somewhere between Dorchester Castle & Corfe Castle, you'll find Lulworth Castle:



Including Hogwarts, that's six running Castles. The five green versions are now all together in the stock box, ready for the next outing...


And that will do for Castles, unless of course any freebies turn up out of the blue!

Sunday, 22 May 2016

Project Hogwarts - part three

 The Silhouette Cameo has done a great job with the nameplates and tender graphics, so after lining the loco (with purchased boiler bands) the nameplates, having also been painted red, were applied:


Now for the tender. Again the lining is not home-made but the Hogwarts Railways logo has been made from scratch and cut using the same method as the nameplates:


Starting to take shape, by this point all of the artwork is done:


After two coats of matt lacquer, the body was reunited with the chassis, which by now has also been refurbished, lubricated and painted:


And we're nearly there - just waiting for a set of tender pickups to arrive before final testing, then the headboard needs to be fitted. It's already cut but needs some card to strengthen it.


Then it'll need some coaches. These will either be some existing HD maroon coaches with a Hogwarts logo added (which have already been printed and cut) or some new overlays similar to the blue and blue & grey EMU projects, which will take ages.

Whatever happens, it'll still be a while before a complete Hogwarts Express takes to the layout.

Clan Line

Here we have a Wrenn two rail loco that was acquired for a very good price and in it's original box.

The condition was so good that I almost considered selling it on, having seen how much these were fetching in this condition on Ebay.

However I realised that I could modify this for three rail running in such a way that the process could be easily reversed and without damaging the chassis. So first job was to dismantle it:


The phosphor bronze strips on the left of the picture above are what I used to return current via the insulated wheels. One strip cut to length is twisted to shape and then, having scraped some paint away from the chassis under the plastic two rail collector, these are clamped to the body using half of the old two rail collector:


The new strips are just visible (bottom wheels)

Next to strip the motor and check the armature.

The brushes are barely worn but the commutator looked quite dull:


...So it was given the drill & fibreglass pen treatment:


The motor was then lubricated and reassembled, with the magnet being turned 180 degrees.

Now for the third rail pickup. The Westcountry chassis requires a longer screw for the third rail pickup and these aren't easy to come by. So the modification below was fabricated for me using a brass collar that was drilled and tapped to the right thread, and a piece of threaded bar cut to the appropriate length:


Some cleaned up spoons were added:


And the modified pickup was bolted to the chassis:


After reassembly, we're ready for testing around the loft: 









Sunday, 15 May 2016

Project Hogwarts - part two


Work continues, using leftover paint. No white primer left so grey it will be...


With the previous maroon LMS repaints, I painted them black and then painted the red over the top to darken the effect. this has gone straight over the grey primer, which makes it slightly lighter but still not as red as the Hornby-produced version...


After masking, the black cab roof, front and sides are painted black, ready for lining and transfers... 


I'm not aware of anyone selling the graphics commercially, so this lot had to be constructed from scratch using Paint & Publisher...
My skills with a scalpel are not great. I am now however the proud owner of a silhouette cutting machine which, once programmed correctly, can plot and cut my transfers with remarkable precision - this little lot were done as a trial set as the machine only arrived on Friday. By the early evening I had my first, usable results..,


Couldn't help but test them. I'll need to fit the cab linings first but they're still on order. There's sufficient spare numbers that I can peel this one off later but the effect is impressive, so is the nameplate. The holder itself is still green so will need to be painted before the final graphics are fitted. These fit really well into the GWR nameplates.


Still a long way to go...

Tuesday, 10 May 2016

Project Hogwarts - part one

I'm not a massive Harry Potter fan but I have sat through most of the films!

Prompted by the recent appearance on Ebay of a Bristol Castle that had been rather crudely painted red, I was mindful of the Hogwarts Castle locomotive.

A bit more research shows that the actual locomotive used is a Hall class (even though it's called Hogwarts CASTLE) but the model version produced by Hornby is a Castle locomotive.

I could cheat and put a modern, plastic body onto a three rail chassis, but that would be too easy!

What I need is a long-term project...

I have red paint left over from the City of Liverpool, it just needs to be a shade lighter - using a white primer should overcome this.

I also need a scrap body - this was a Bristol Castle and has just spent the night in a tray of Cillit Bang (quite effective)


Now for transfers - these don't seem to be commercially available so I'll have to be creative and make my own, including the tender crest.

For now I've managed to create the nameplate banner and cabside numbers using my PC:


...and did a quick test print to check the dimensions:





So far so good, but a long way to go yet...


Thursday, 5 May 2016

Aftermath

So after a four day hammering of the rolling stock, time to commence servicing and repairs.

The video of our time at Abbey Hill can now be found on the YouTube page.

What the video doesn't show is just how much of a hammering the 0-6-2 tanks got, particularly over the first two days.

I decided to take a look at all of the tank locos, starting with the failures and then checking the rest. My black LMS tank expired with a puff of smoke from the cab, which I presumed meant that the armature was no more. As it turns out, the damage is no more than carbon build up between the commutator segments.

Not easy to see, but the commutator gap is almost non-existent and full of carbon deposit:


After a quick clean up using a knife blade and fibre glass pen, the armature was refitted back into the loco and after a quick lube, it's running fine - result!

Next for the red LMS (2273) that I rewound myself. Again the issue appears to be carbon build up, the resistance readings across all three segments are fine and no issues with the way I've wound the armature. After another clean up and lube, this also runs fine.

So basically, nine of my ten tank engines have been stripped and cleaned, the only exception being the GWR tank, which is a recent acquisition and not in need of overhauling (yet)

Next job will be to check the 2-6-4 tanks, then I'll slowly work through the rest of the stock box by box.

Plenty of time before the next outing.

Monday, 2 May 2016

Somewhere, in a field in Somerset...

Four days of playing trains, roughly about 30 hours of running.

That's quite an achievement in itself but then factor in that we were in a marquee for the first time!

So we found ourselves in the craft & modelling tent at the Abbey Hill Steam Fair, surrounded by all things steam driven (fantastic smell) pitched our caravans (first time we've camped and played trains too) and set about getting this thing to work in a tent. 

The solution to the uneven ground was to use various metal and wooden shims...



Thankfully these were all expertly machined for me prior to the event and there were plenty of them, so after some considerable tweaking, including using a spirit level for the first time since the layout was built, we actually ended up with a perfectly level layout that was reliable enough to even brave the goods train on the upper loop!



I was cautious about running the older locos on the shuttle, as four days of short runs along the shuttle probably wasn't going to be a good idea. So the recently acquired Lima railcar was deployed, having added extra ballast...


The Bachmann DMU also made its first appearance. It was only brought along to see if it would run but actually ended up spending most of the four days running up and down in tandem with either the GWR railcar or the Hornby bubble car!


As for failures - there were a few, and this was to be expected. Having celebrated running for two days with only two failures, two more locos failed in short succession shortly before the end of the second day!

The blue and grey EMU failed twice, each time a broken wire was the culprit and the wiring is now so short that a complete rewire will be required. I did at least manage to get it going again.


One of the two red LMS tanks also failed, sadly the one that I restored as part of the scrapheap project. The top bearing nut came loose and the armature lifted to the point that the carbon brushes were running on the bottom edge of the commutator, knocking off one of the coil connections. Hopefully it'll just need re-soldering, if not then the armature will have to be rewound again.


My faithful black LMS tank also failed with a nice puff of expensive smoke shooting out of the driver's cab, another armature job I suspect.

The Pacer also got an outing, spending most of the time running on the upper loop without issue before it also shuddered to a halt. Hopefully just a light oiling required.


The Bachmann DMU, Hornby bubble car and Lima railcar were used throughout the weekend on the shuttle, with the SR EMU substituting the Bachmann DMU on the final afternoon. All ran really well and without incident. This combined with the Arduino shuttle control system provided a lot of interest - we were the only model railway in the exhibition so attracted people who weren't expecting to see a toy trainset!


 The GWR railcar in the smaller shuttle platform at Brough. The extra ballast meant that the reverse curve and points were not an issue.


After four, hectic and full-on days of keeping all four tracks in use, I've returned home with only a handful of locomotives requiring attention. Some will need only minor servicing and possibly two will need armatures. Considering the age of the rolling stock, the extremes of temperature and moisture levels of the marquee and the uneven ground, I think we've done pretty well to come home with so few casualties after such a battering. 

Sadly the final day was cut short due to the poor weather but we'll be back again next year. Our next outing in July is also in a marquee (not four days though!)

Plenty of video footage has been captured, including the Pacer running at a stupidly fast speed, this will be uploaded in the next few days.